China JT Metal is the supplier of plate, flat and round bar. Diameters can be sawn to your required lengths as one offs or multiple cut pieces. Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision ground bar to your required tolerances.

Contact our experienced sales team who will assist you with your 2767 alloy steel enquiry.

Typical applications and components produced in 2767 include plastic moulds, cutlery dies, shear blades for heavy gauge material, cutting tools, drawing jaws and highly stressed coining tools.

Heat slowly and uniformly to 1050°C. Re heat as necessary and avoid working below 850°C. After forging cool slowly in furnace or thermoinsulating material.

Heat uniformly to 630-650°C. Soak well and cool slowly in the furnace to approximately 600°C then cool in air.

When tools produced in 2767 tool steel are heavily machined, stress relieving is recommended just before finish machining in order to relieve machining strains. Heat to approximately 650°C. Soak well and allow to cool in air.

Pre heat the 2767 tool slowly and uniformly to 650-700°C and thoroughly soak. Continue heating to the final hardening temperature of 840-870°C and allow the component to be heated through. Quench the component in oil or cool in air.

Slowly heat the tool uniformly and thoroughly at the selected tempering temperatures and hold at heat for one hour per 25mm of total thickness but for a minimum of two hours. Cool in air. 2767 tool steel can be hardened by vacuum furnace, gas quench process.

Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each 2767 steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of tool steels.

Select the correct grade of wheel in consultation with the grinding wheel manufacturer. Ensure the grinding wheel is in good condition by means of a suitable dressing tool. Wet grinding is a preferable option using a copious supply of coolant. If dry grinding is resorted to then use a very soft wheel.

2767 tool steel is supplied in accordance with our ISO 9001 : 2008 registration.

Contact China JT Metal with your enquiries for flat bar, square bar and round bar in 2767 tool steel.